The 40×40 45-degree K8 profile can be examined where an inclined face or corner geometry drives the design.
The 45-degree designation distinguishes it from a standard square sigma section. The source states 0.95 kg/m and 6063 T5; establish the joint from its technical drawing.
Selection details
Mark the mating component's contact line and fastening direction. Use measured geometry to choose working surfaces rather than visual assumptions.
Verified technical data
| Part number | 1.1.08.040040.06 |
|---|---|
| Stock name | 40×40 45° Angled profile |
| Outer size | 40×40 |
| Material | 6063 T5 |
| L(mm) | 6000 |
| Ix | 4.48 cm4 |
| Iy | 4.48 cm4 |
| Wx | 1.94 cm³ |
| Wy | 1.94 cm³ |
| Area | 3.44 cm² |
| Mass | 0.95 Kg/m |
Does it have the same geometry as a standard square 40×40?
No. Its face arrangement differs, so assess the mating contact area from this section's own drawing.
Request a quotation
Share the inclined-joint drawing for a length-and-quantity quotation on the 40×40 45-degree K8. Part number: 1.1.08.040040.06
