The radius-shaped 45×45 K10 profile is listed at 1.20 kg/m for frame edges where contour matters.
The rounded outline changes panel seating. Both axes are listed at 7.77 cm⁴ inertia and 3.10 cm³ section modulus.
Selection details
Select caps, panels and corners from the section drawing rather than nominal size alone.
Verified technical data
| Part number | 1.1.10.045045.08 |
|---|---|
| Stock name | 45×45 Radius Sigma profile |
| Outer size | 45×45 |
| Material | 6063 T5 |
| L(mm) | 6000 |
| Ix | 7.77 cm4 |
| Iy | 7.77 cm4 |
| Wx | 3.10 cm³ |
| Wy | 3.10 cm³ |
| Area | 4.46 cm² |
| Mass | 1.20 Kg/m |
Will a standard 45×45 end cap fit?
Its outline must match the radius geometry; nominal dimensions are insufficient.
Request a quotation
Send the edge-joint drawing for a radius-profile quotation. Part number: 1.1.10.045045.08
