When modernising a machine on a single-phase supply, input-circuit capacity is as important as the motor rating. INOVANCE MD200S2.2B-INT serves the 2.2 kW motor class with 11 A output, while the catalogue lists 27 A rated input current. That distinction prevents an existing cable or protective device from being accepted on motor power alone. The compact MD200 enclosure and built-in braking unit provide useful starting data for the retrofit scope. If an external braking resistor is required, it must be sized for the load energy and identified separately in the offer.
Technical specifications
| Motor rating | 2.2 kW |
|---|---|
| Rated input | 200-240 V AC, 1 phase |
| Rated output current | 11 A |
| Rated input current | 27 A |
| Control | V/f / SVC (V2.6 brochure) |
| Communication | Modbus RTU |
| Overload capacity | 150% / 60 s; 180% / 3 s (V2.6 brochure) |
| Maximum output frequency | 500 Hz (V2.6 brochure) |
| Ingress protection | IP20 |
| Dimensions (H × W × D) | 180 × 75 × 145 mm |
Source comparison: Table follows brochure V2.6. The online catalogue lists 599 Hz and 180% / 2 s; confirm the hardware revision. SVC support is also inconsistent between sources.
Current ratings are specified at 6 kHz carrier frequency. Derating applies above 40 °C; operation up to 50 °C is subject to manufacturer conditions.
Selection for your application
Review the incoming circuit, motor connection for the 200-240 V output class and stopping energy together. The old drive's kW figure alone is insufficient for a replacement decision.
Does the 11 A output imply an 11 A input requirement?
No. The catalogue specifies 27 A rated input for this model. Input protection and cabling must follow manufacturer instructions and installation conditions.
Installation and commissioning
Electrical installation and initial commissioning require qualified personnel and the exact-model manual. Verify the supply, load connections and safe stopping arrangement before energising. Retain the parameter or program backup with the project records.
Quotation and supply
Send the existing drive code, cabinet supply and motor connection details for an MD200S2.2B-INT retrofit quotation.
Confirm price, stock, lead time and accessory scope in the quotation.
Explore related products
Manufacturer product/enclosure visual. Shared by some codes; a separate full-code nameplate photo is unverified.
