Restarting a loaded conveyor creates a different duty from a no-load trial. INOVANCE MD310T5.5B-INT supplies a 5.5 kW motor class with 13 A output. Acceleration and deceleration settings should be coordinated with material flow. Any mechanical brake or rollback prevention must be designed separately for the conveyor arrangement.
Technical specifications
| Motor class | 5.5 kW |
|---|---|
| Rated input | 3-phase 380-440 VAC |
| Output current (6 kHz) | 13 A |
| Rated input current | 14.6 A |
| Control methods | V/f; SVC |
| Communications | Modbus RTU (RS485) |
| Frequency ceiling | SVC: 300 Hz; V/f: 500 Hz |
| Overload | 150% / 60 s; 180% / 2 s |
| Braking unit | Built in; resistor selected separately |
| Protection | IP20 |
Current is rated at 6 kHz carrier frequency. Derating applies above 40 °C. Confirm enclosure depth and clearances from the exact-code drawing.
Application selection
State maximum transported load, incline and restart conditions. A built-in braking unit does not replace a mechanical holding brake.
Does the braking unit hold a stationary belt?
No. Electrical deceleration and mechanical load holding are different functions, particularly on an inclined conveyor.
Installation and commissioning
Qualified personnel must use the exact-model manual for installation and commissioning. Apply lockout before physical inspection, retain project/parameter backups and never bypass protective functions.
Quotation and supply
Send the conveyor load, incline and stopping frequency for a quotation that also addresses braking requirements.
Price, stock and lead time are not verified and require confirmation in the quotation.
Product comparison
MD310T3.7B-INT – Separate model; not an automatic substitute.
Manufacturer-assigned product/enclosure visual. A separate full-code nameplate is unverified; some models share the image.
