Inductive switch | 50153120
Leuze IS D08MM/4NC-4N0-M8.3 (50153120) is a inductive switch. Nominal distance Sn: 4 mm; Operating range: 0 … 3.2 mm; Supply voltage: 10 … 30 V, DC; Output 1: Transistor, PNP.
Technical specifications
Basic data
| Series | D08 |
|---|---|
| type. operating range limit Sn | 4 mm |
| Operating range Sa | 0 … 3.2 mm |
Characteristic parameters
| MTTF | 340 years |
|---|
Electrical data
| Protective circuit | Inductive protection | Polarity reversal protection | Short circuit protected |
|---|
Performance data
| Supply voltage UB | 10 … 30 V, DC |
|---|---|
| Residual ripple | 0 … 10 %, From UB |
| Open-circuit current | 0 … 15 mA |
| Temperature drift, max. (in % of Sr) | 15 %, Over the entire operating temperature range |
| Repeatability, max. (in % of Sr) | 5 %, For UB | = 20 … 30 V DC, ambient temperature T | a | = 23 °C ± 5 °C |
| Switching hysteresis | 15 % |
Outputs
| Number of digital switching outputs | 1 Piece(s) |
|---|
Switching outputs
| Voltage type | DC |
|---|---|
| Switching current, max. | 100 mA |
| Residual current, max. | 0.1 mA |
| Voltage drop | ≤ 2 V |
Switching output 1
| Switching element | Transistor, PNP |
|---|---|
| Switching principle | NC (normally closed) |
Time behavior
| Switching frequency | 1,000 Hz |
|---|---|
| Readiness delay | 100 ms |
Connection
| Number of connections | 1 Piece(s) |
|---|
Connection 1
| Function | Signal OUT | Voltage supply |
|---|---|
| Type of connection | Connector |
| Thread size | M8 |
| Type | Male |
| Material | Stainless steel |
| No. of pins | 3 -pin |
Mechanical data
| Design | Cylindrical |
|---|---|
| Dimension (Ø x L) | 8 mm x 50.7 mm |
| Thread size | M8 x 1 mm |
| Type of installation | Non-embedded/non-flush |
| Housing material | Stainless steel |
| Stainless steel housing | V2A |
| Sensing face material | Plastic, Polybutylene (PBT) |
| Net weight | 9 g |
| Housing color | Red, RAL 3000 | Silver |
| Type of fastening | Mounting thread | Via optional mounting device |
| Standard measuring plate | 12 x 12 mm², Fe360 |
Operation and display
| Type of display | LED |
|---|---|
| Number of LEDs | 1 Piece(s) |
Environmental data
| Ambient temperature, operation | -25 … 70 °C |
|---|---|
| Ambient temperature, storage | -25 … 70 °C |
Certifications
| Degree of protection | IP 67 |
|---|---|
| Protection class | III |
| Approvals | c UL US |
| Test procedure for EMC in accordance with standard | IEC 61000-4-2 | IEC 61000-4-3 | IEC 61000-4-4 |
| Standards applied | IEC 60947-5-2 |
Correction factors
| Aluminum | 0.5 |
|---|---|
| Stainless steel | 0.8 |
| Copper | 0.35 |
| Brass | 0.5 |
| Fe360 steel | 1 |
Application and product selection
Evaluate target metal, target dimensions and flush/non-flush mounting together. Do not treat the nominal distance as the assured switching distance.
- Match the full model and part number before ordering.
- Check supply voltage, output function and connection against the machine requirements.
- Use the manufacturer pin assignment and installation instructions for this exact device.
Installation and commissioning
- Qualified personnel should install and wire the device with the machine in a safe, isolated state.
- Validate detection with actual targets and the intended production speed.
- Inspect the sensing face, cable routing and mounting; repeat the functional check after maintenance.
Automation engineering support
Share the full model, part number and application conditions for product selection, technical supply and commissioning support. Price, stock, delivery time and accessory scope are confirmed with the quotation.
Technical source: Leuze 50153120 official product record.
