Capacitive sensor | 50136605
Leuze LCS-2M18P-N15PNO-K020V (50136605) is a capacitive sensor. Switching distance Sn: 2 … 15 mm; Supply voltage: 10 … 30 V, DC; Output 1: Transistor, PNP; Connection: Cable / 2,000 mm.
Technical specifications
Basic data
| Series | LCS-2 |
|---|---|
| Switching distance Sn | 2 … 15 mm |
| Assured switching distance | 12.1 mm |
Electrical data
| Protective circuit | Polarity reversal protection | Short circuit protected |
|---|
Performance data
| Supply voltage UB | 10 … 30 V, DC |
|---|---|
| Residual ripple | 0 … 10 % |
| Open-circuit current | 10 mA |
| Temperature drift, max. (in % of Sr) | 10 % |
| Repeatability, max. (in % of Sr) | 5 % |
| Rated operating current | 200 mA |
Outputs
| Number of digital switching outputs | 1 Piece(s) |
|---|
Switching outputs
| Type | Digital switching output |
|---|---|
| Voltage type | DC |
Switching output 1
| Switching element | Transistor, PNP |
|---|---|
| Switching principle | NO (normally open) |
Time behavior
| Switching frequency | 100 Hz |
|---|
Connection
| Number of connections | 1 Piece(s) |
|---|
Connection 1
| Function | Signal OUT | Voltage supply |
|---|---|
| Type of connection | Cable |
| Cable length | 2,000 mm |
| Sheathing material | PVC |
| Number of conductors | 3 -wire |
| Wire cross section | 0.35 mm² |
Mechanical data
| Design | Cylindrical |
|---|---|
| Dimension (Ø x L) | 18 mm x 70 mm |
| Thread size | M18 x 1 mm |
| Type of installation | Non-embedded/non-flush |
| Housing material | Plastic |
| Plastic housing | Polybutylene (PBT) |
| Sensing face material | Plastic, Polybutylene (PBT) |
| Cover material | Plastic, Polybutylene (PBT) |
| Net weight | 94 g |
Operation and display
| Type of display | LED |
|---|---|
| Number of LEDs | 1 Piece(s) |
| Operational controls | Multiturn potentiometer |
| Function of the operational control | Sensitivity adjustment |
| Switching distance, adjustable | Yes |
Environmental data
| Ambient temperature, operation | -25 … 70 °C |
|---|
Certifications
| Degree of protection | IP 67 |
|---|---|
| Protection class | III |
| Standards applied | IEC 60947-5-2 |
Application and product selection
Material properties, mounting conditions and the surrounding environment can influence capacitive detection. Validate the sensitivity setting with the actual material.
- Match the full model and part number before ordering.
- Check supply voltage, output function and connection against the machine requirements.
- Use the manufacturer pin assignment and installation instructions for this exact device.
Installation and commissioning
- Qualified personnel should install and wire the device with the machine in a safe, isolated state.
- Validate detection with actual targets and the intended production speed.
- Inspect the sensing face, cable routing and mounting; repeat the functional check after maintenance.
Automation engineering support
Share the full model, part number and application conditions for product selection, technical supply and commissioning support. Price, stock, delivery time and accessory scope are confirmed with the quotation.
Technical source: Leuze 50136605 official product record.
