Capacitive sensor | 50136561
Leuze LCS-2M30P-F20PNO-K020V (50136561) is a capacitive sensor. Series: LCS-2; Switching distance S n: 2 … 20 mm; Assured switching distance: 16.2 mm.
Technical specifications
Basic data
| Series | LCS-2 |
|---|---|
| Switching distance S n | 2 … 20 mm |
| Assured switching distance | 16.2 mm |
Electrical data
| Protective circuit | Polarity reversal protection Short circuit protected |
|---|---|
| Supply voltage U B | 10 … 30 V, DC |
| Residual ripple | 0 … 10 % |
| Open-circuit current | 10 mA |
| Temperature drift, max. (in % of S r ) | 10 % |
| Repeatability, max. (in % of S r ) | 5 % |
| Rated operating current | 200 mA |
| Number of digital switching outputs | 1 Piece(s) |
| Type | Digital switching output |
| Voltage type | DC |
| Switching element | Transistor, PNP |
| Switching principle | NO (normally open) |
Performance data
| Supply voltage U B | 10 … 30 V, DC |
|---|---|
| Residual ripple | 0 … 10 % |
| Open-circuit current | 10 mA |
| Temperature drift, max. (in % of S r ) | 10 % |
| Repeatability, max. (in % of S r ) | 5 % |
| Rated operating current | 200 mA |
Outputs
| Number of digital switching outputs | 1 Piece(s) |
|---|---|
| Type | Digital switching output |
| Voltage type | DC |
| Switching element | Transistor, PNP |
| Switching principle | NO (normally open) |
Switching outputs
| Type | Digital switching output |
|---|---|
| Voltage type | DC |
Switching output 1
| Switching element | Transistor, PNP |
|---|---|
| Switching principle | NO (normally open) |
Time behavior
| Switching frequency | 100 Hz |
|---|
Connection
| Number of connections | 1 Piece(s) |
|---|---|
| Function | Signal OUT Voltage supply |
| Type of connection | Cable |
| Cable length | 2,000 mm |
| Sheathing material | PVC |
| Number of conductors | 3 -wire |
| Wire cross section | 0.35 mm² |
Connection 1
| Function | Signal OUT Voltage supply |
|---|---|
| Type of connection | Cable |
| Cable length | 2,000 mm |
| Sheathing material | PVC |
| Number of conductors | 3 -wire |
| Wire cross section | 0.35 mm² |
Mechanical data
| Design | Cylindrical |
|---|---|
| Dimension (Ø x L) | 30 mm x 85 mm |
| Thread size | M30 x 1.5 mm |
| Type of installation | Embedded/flush |
| Housing material | Plastic |
| Plastic housing | Polybutylene (PBT) |
| Sensing face material | Plastic, Polybutylene (PBT) |
| Cover material | Plastic, Polybutylene (PBT) |
| Net weight | 136 g |
Operation and display
| Type of display | LED |
|---|---|
| Number of LEDs | 1 Piece(s) |
| Operational controls | Multiturn potentiometer |
| Function of the operational control | Sensitivity adjustment |
| Switching distance, adjustable | Yes |
Environmental data
| Ambient temperature, operation | -25 … 70 °C |
|---|
Certifications
| Degree of protection | IP 67 |
|---|---|
| Protection class | III |
| Standards applied | IEC 60947-5-2 |
Classification
| Customs tariff number | 85365019 |
|---|---|
| ECLASS 5.1.4 | 27270102 |
| ECLASS 8.0 | 27270102 |
| ECLASS 9.0 | 27270102 |
| ECLASS 10.0 | 27270102 |
| ECLASS 11.0 | 27270102 |
| ECLASS 12.0 | 27274201 |
| ECLASS 13.0 | 27274201 |
| ECLASS 14.0 | 27274201 |
| ECLASS 15.0 | 27274201 |
| ECLASS 16.0 | 27274201 |
| ETIM 5.0 | EC002715 |
| ETIM 6.0 | EC002715 |
| ETIM 7.0 | EC002715 |
| ETIM 8.0 | EC002715 |
| ETIM 9.0 | EC002715 |
| ETIM 10.0 | EC002715 |
| UNSPSC 26.08 | 39122230 |
Application and product selection
Evaluate the full model, task, operating range, electrical interface, connection and environmental conditions together.
Installation and commissioning
Qualified personnel should install and wire the device with the machine in a safe, isolated state. Validate operation under actual application conditions.
Maintenance
Inspect active surfaces, connections, cable routing and mounting hardware periodically.
Automation engineering support
Share the exact model, part number and application conditions for product selection, technical supply and commissioning support.
Technical source: Leuze 50136561 official product record.
