DR172.00 provides two-stage parallel-shaft transmission with a 30 mm bore in the D17 group. For a conveyor drum or similar driven shaft, check fit tolerance and shaft condition as well as diameter. Drum speed and operating load help turn the proposed direct connection into a selected motor-and-ratio assembly.
Selection for your machine
Send the drum-shaft drawing and required rotational speed.
Technical references
| Model code | DR172.00 |
|---|---|
| Housing group | D17 |
| Gear type | Parallel-shaft helical |
| Stages | 2 |
| Input connection | Directly motor-coupled; motor selection required |
| Output / mounting | Standard hollow output (.00) |
| Standard hollow bore (mm) | Ø30 |
| Housing-group nominal torque (Nm, reference) | 200 |
This is a base model record. Select ratio, motor or input interface and mounting position when ordering. Housing torque is a reference, not a guaranteed configured output. Price, stock and lead time require confirmation.
Will any nominal 30 mm shaft fit correctly?
Diameter alone is insufficient; tolerance, key and surface condition must meet installation requirements.
Request a quotation
Request a DR172.00 proposal for your drum drive.
Original manufacturer family image; the exact housing size and motor may differ.
Official series page · Manufacturer manual
