DR372.00 is a two-stage parallel-shaft D37 model with a 40 mm bore. Although D28 shares that bore size, the D37 housing reference is 820 Nm. A load-driven upgrade should check housing placement and restraint arrangement as well as retaining the existing shaft diameter.
Selection for your machine
Send the existing nameplate, load increase and mounting drawing.
Technical references
| Model code | DR372.00 |
|---|---|
| Housing group | D37 |
| Gear type | Parallel-shaft helical |
| Stages | 2 |
| Input connection | Directly motor-coupled; motor selection required |
| Output / mounting | Standard hollow output (.00) |
| Standard hollow bore (mm) | Ø40 |
| Housing-group nominal torque (Nm, reference) | 820 |
This is a base model record. Select ratio, motor or input interface and mounting position when ordering. Housing torque is a reference, not a guaranteed configured output. Price, stock and lead time require confirmation.
Why distinguish D28 and D37 despite the same bore?
Capacity and mounting geometry can differ; a shared bore does not establish interchangeability.
Request a quotation
Compare DR372.00 capacity with your present drive.
Original manufacturer family image; the exact housing size and motor may differ.
Official series page · Manufacturer manual
