Technical description and application scope
Festo EGC-80-500-BS-10P-KF-0H-ML-GK 3013536 Spindle Axis
A ball-screw EGC linear axis with 500 mm working stroke and 10 mm/rev spindle pitch for precise machine motion.
Verified technical specifications, selection, installation and commissioning notes for Festo EGC-80-500-BS-10P-KF-0H-ML-GK, with Automation engineering and technical-service support.
Verified technical data
- Part number: 3013536
- Working stroke: 500 mm
- Size: 80
- Spindle diameter: 15 mm
- Spindle pitch: 10 mm/rev
- Guide: Recirculating ball bearing guide
- Drive principle: Electromechanical linear axis with ball screw
- Motor types: Step motor or servo motor
- Max. acceleration: 15 m/s²
- Max. speed: 0.5 m/s
- Repeatability: ±0.02 mm
- Max. feed force Fx: 650 N
- Duty cycle: 100%
- Protection: IP40
Selection criteria
Check required stroke, speed, acceleration, feed force and repeatability against the verified limits. Select motor/gearbox/controller from current Festo sizing and compatibility data. Verify mounting position, payload moments and guide loads. Allow installation envelope from exact CAD, not stroke alone.
Installation, commissioning and maintenance
Mount the axis on a flat, sufficiently rigid structure using the prescribed support/mounting points. Align external loads to avoid inadmissible guide moments and side loads. Home/reference the axis at reduced speed and validate travel limits. Tune motion parameters within 0.5 m/s speed and 15 m/s² acceleration limits for this exact configuration. Inspect lubrication, spindle/guide condition and mounting integrity at manufacturer-prescribed intervals.
Source policy: Numeric technical claims are taken only from current official manufacturer sources. No price, stock, lead-time, warranty, distributor or partnership claim is included.
