Technical description and application scope
Turck NI10-G18-AP6X 4641600 Inductive Proximity Sensor
An M18 threaded inductive proximity sensor with 10 mm rated sensing distance and 3-wire PNP normally-open output.
Verified technical specifications, selection, installation and commissioning notes for Turck NI10-G18-AP6X, with Automation engineering and technical-service support.
Verified technical data
- ID: 4641600
- Rated sensing distance: 10 mm
- Mounting: Non-flush
- Secured operating distance: ≤0.81 × Sn
- Repeat accuracy: ≤2% of full scale
- Hysteresis: 3…15%
- Operating voltage: 10…30 VDC
- Rated operating current: ≤200 mA
- Output: 3-wire, NO, PNP
- Switching frequency: 0.5 kHz
- Housing: M18 × 1 chrome-plated brass
- Connection: Cable connection
Selection criteria
Confirm 10 mm nominal and secured operating distance suit target geometry. Account for correction factors for stainless steel/aluminum/brass targets. Confirm PNP NO logic and 10–30 VDC supply. Use non-flush mounting clearances from the exact datasheet.
Installation, commissioning and maintenance
Maintain non-flush free-zone clearances and secure the M18 body without over-torque. Protect the cable from flex, abrasion and sharp edges. Test with the actual target material at worst-case distance and alignment. Verify PLC input logic and switching repeatability across machine tolerance. Inspect sensing face, mounting position and cable condition periodically.
Source policy: Numeric technical claims are taken only from current official manufacturer sources. No price, stock, lead-time, warranty, distributor or partnership claim is included.
