The 5 kW H2 CD motor rated at 15.8 Nm can be assessed for heavy servo mechanisms. Its 47.4 Nm peak needs verification with a compatible drive and motion cycle because peak capability depends on pairing.
Technical specifications
| Rated power | 5 kW |
|---|---|
| Rated torque | 15.8 N·m |
| Peak torque | 47.4 N·m |
| Rated current | 17 A |
| Motor voltage class | 380 V |
| Rated speed | 3000 rpm |
| Flange | 130 mm |
| Encoder | A3: 23-bit multi-turn |
| Holding brake | Not fitted |
| Shaft / oil seal | Keyed shaft; oil seal fitted |
The A02 23-bit table is used, not the 26-bit table. Peak torque depends on drive pairing. A331R has no holding brake; design load retention separately.
Application selection
Plot continuous load and transient demand separately on a torque-time chart.
Does higher motor power remove mechanical load limits?
Shaft and bearing limits still apply independently of torque capability.
Installation and commissioning
Qualified personnel must use the exact-model manual for installation and commissioning. Apply lockout before physical inspection, retain project/parameter backups and never bypass protective functions.
Quotation and supply
Send the mechanism load calculation for a 5 kW assembly offer.
Price, stock and lead time are not verified and require confirmation in the quotation.
Product comparison
MS1H1-55B30CB-A331R-INT – Separate model; not an automatic substitute.
Manufacturer-assigned product/enclosure visual. A separate full-code nameplate is unverified; some models share the image.
