MR282 is the two-stage foot-mounted model in the M28 group. Its 35 × 70 mm output shaft allows comparison with M27 interfaces, but equal shaft dimensions do not mean equal capacity. The official 600 Nm housing reference must be considered alongside motor selection and service factor.
Selection for your machine
For an M27 upgrade, explain the load and reason for replacement.
Technical references
| Model code | MR282 |
|---|---|
| Housing group | M28 |
| Gear type | Helical |
| Stages | 2 |
| Input connection | Directly motor-coupled; motor selection required |
| Output / mounting | Foot mounted, solid output shaft |
| Standard output shaft diameter/length (mm) | Ø35/70 |
| Housing-group nominal torque (Nm, reference) | 600 |
This is a base model record. Select ratio, motor or input interface and mounting position when ordering. Housing torque is a reference, not a guaranteed configured output. Price, stock and lead time require confirmation.
Do MR272 and MR282 have the same torque reference?
Their housing references are 450 and 600 Nm respectively; configuration-specific suitability still requires checking.
Request a quotation
Request an MR282 upgrade assessment using your actual duty.
Original manufacturer family image; the exact housing size and motor may differ.
Official series page · Manufacturer manual
