MR283 packages three-stage M28 gearing with a directly coupled motor and foot mounting. Frequent starts make average load an incomplete selection basis. Starting resistance, cycles per day and idle periods help establish a suitable motor, ratio and any required options for the real duty.
Selection for your machine
Specify starts per hour and whether restarting occurs under load.
Technical references
| Model code | MR283 |
|---|---|
| Housing group | M28 |
| Gear type | Helical |
| Stages | 3 |
| Input connection | Directly motor-coupled; motor selection required |
| Output / mounting | Foot mounted, solid output shaft |
| Standard output shaft diameter/length (mm) | Ø35/70 |
| Housing-group nominal torque (Nm, reference) | 600 |
This is a base model record. Select ratio, motor or input interface and mounting position when ordering. Housing torque is a reference, not a guaranteed configured output. Price, stock and lead time require confirmation.
Does frequent starting only require a larger motor?
No. Starting torque, gearbox loading, service factor and the full duty cycle must be considered.
Request a quotation
Request an MR283 quotation based on your start-stop cycle.
Original manufacturer family image; the exact housing size and motor may differ.
Official series page · Manufacturer manual
